Stainless Steel 18-8 Lock Nut, #10-24 (Pack of 25)

Stainless Steel 18-8 Lock Nut, #10-24 (Pack of 25) Reviews

Other Picture

Stainless Steel 18-8 Lock Nut, #10-24 (Pack of 25) Feature

• Lock Nuts ensure a secure hold; reduce slippage
• General Purpose Stainless Steel suitable where formability and cost are important considerations
• Drive system is a hexagon-shaped head
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads
• Ensure a lasting hold for any project

Lock Nuts are commonly used when spinning of components would be a problem. They are designed to interlock with the locking surface for a secure hold, without slippage. Hex drive systems are driven with a wrench.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316). Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to % of Nickel contained in the material. Stainless Steel 18-8 denotes 18% chromium and 8% nickel. Stainless Steel 18-8 can be formed and welded. Stainless Steel 18-8 is typically non-magnetic, though the material can become slightly magnetic when cold worked (cold working refers to altering the physical properties of the material without the use of temperature).

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Stainless Steel 18-8 Flat Washer, ANSI, #5, 0.141" ID, 0.5" OD, 0.04" Thick (Pack of 100)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, #8-32, 1/2" Length (Pack of 100)
• Stainless Steel 316 Machine Screw, Pan Head, Phillips Drive, #6-32, 3/4" Length (Pack of 25)
• Stainless Steel 18-8 Internal Tooth Lock Washer, ANSI, #4, 0.123" ID, 0.270" OD, 0.015" Thick (Pack of 100)
• Stainless Steel 18-8 Flat Washer, 5/16", 0.343" ID, 0.75" OD, 0.05" Thick (Pack of 100)

Detail Reviews

Jun 30, 2011 02:05:04